RADIOMETER ABL800 FLEX Operator's Manual page 74

3. Installation and setup
Analyzer security,
Operators and This program allows you to add, edit or remove operators and to assign an access
Passwords profile to each operator.
NOTICE: If the Centralized User Management option is enabled in the General
Security screen, you cannot add, remove or edit the operators, but only view the
access profiles of the individual operators.
To enter the Operators and Passwords program, press Menu – Utilities – Setup –
Analyzer Security – Operators and Passwords.
When the analyzer is taken into use, the following default operators are available:
Manager
Radiometer
Remote operator
3-8
Continued
Operator
All menu items and programs (not service programs). It is
recommended to remove this operator with the standard
password: 123456, and enter the actual users with their
profiles and passwords.
All menu items and programs (user and service) on the
analyzer. Note that "Radiometer" cannot be removed from
the operator list.
Only if the Remote Support option key is installed.
ABL800 FLEX Operator's Manual
Shows the list of
available operator
profiles
Shows the list of
actual operators
Has access to...
Continued on next page