RADIOMETER ABL800 FLEX Operator's Manual page 322

11. Troubleshooting
Analyzer messages,
Messages at
manager level
(continued)
740-743
11-40
Continued
No. Message
712 FHbF
measure-
ment not
possible
713 ctBil
measure-
ment not
possible
714, AutoCheck
mechanical
error
715 AutoCheck
communica-
tion error
716 AutoCheck
cover
missing
717 Carousel
packing not
optimal
ABL800 FLEX Operator's Manual
Interpretation
Composition of blood
sample makes FHbF
measurement too
inaccurate, but OXI
parameters are
corrected for HbF. See
explanation in the
Reference Manual.
Blood sample ctHb is
so high that nearly no
plasma is left to
measure plasma
bilirubin on.
ctHb > 15.5mmol/L.
A mechanical error
occurred in one of the
AutoCheck sub-
modules.
Communication error
between AutoCheck
submodules.
The cover was removed
from the AutoCheck
module.
The AutoCheck
carousel was not
packed according to the
schedule.
Operator action
Informative message. No
analyzer error was
detected.
Informative message. No
analyzer error was
detected.
- Check the AutoCheck
module cover. Close if
opened.
- If error persists, contact
Radiometer service
representative.
- Shut down the analyzer
using the Temporary
Shutdown function, then
restart the analyzer.
- Contact Radiometer
Service Representative.
Mount the AutoCheck
cover.
Removal condition:
AutoCheck cover is
mounted correctly.
Repack AutoCheck
carousel according to the
packing list.
Removal condition:
AutoCheck carousel
packed according to
Packing list.
Continued on next page