RADIOMETER ABL800 FLEX Operator's Manual page 106

3. Installation and setup
Quality control setup,
QC schedule This program allows you to schedule quality control measurements for your
analyzer.
The screen shows the timetable for all days of the week and time during a day.
Step
Symbols for manual and automatic quality control are as follows:
To add a new quality control solution to a schedule, do the following:
Step
3-40
Continued
Action
To select time during a day, use the ↑ and ↓ buttons.
1.
To display other weekdays, use the ← and → buttons.
2.
measurement(s) on the control solution manually performed.
measurement(s) on the control solution automatically performed.
Action
Select the desired time.
1.
2. Press the Add button to display the screen below.
Touch the "QC slot" box to activate it.
ABL800 FLEX Operator's Manual
Slots/quality
control
solutions
Continued on next page