RADIOMETER ABL800 FLEX Operator's Manual page 193

ABL800 FLEX Operator's Manual
Quality control result,
High Crea Crea
Check II Solution and the measured value. It is shown on the plot – see page 5-14.
(for the ABL8x7
To evaluate the Crea
FLEX analyzers
temperature for the 14-day period in the Environment Setup – see Analyzer settings
only) (continued)
in chapter 3.
The ambient temperature on the High Crea Check ID screen is grayed out, i.e. it
can only be viewed. The ambient temperature setting can be changed in the
Environment Setup.
Quality control The Quality Control Plot screen appears once the Plot button is pressed.
plot
The following diagram shows the details of a typical plot.
Out-of-range symbol
Continued
is the difference between the expected creatinine value in the Cleaning Met
diff.
accurately, it is required to enter the expected ambient
diff.
Slot number
Measurement
Lot change
Parameter
Solution type
Control range upper limit
Date
Time
Measured value
Control range lower limit
Continued on next page
5. Quality control
5-13