RADIOMETER ABL800 FLEX Operator's Manual page 43

ABL800 FLEX Operator's Manual
Screen elements,
Center section The center section is the main information and interaction area of which there are
many different types.
The center section of the Ready screen is described part by part, starting from the
top (for the analyzers without FLEXQ module the center part contains the analyzer
type and – if entered in Miscellaneous Setup (see chapter 3) – analyzer message).
This part of the Ready screen contains the following elements:
• Analyzer name
• The messages to the operator regarding the FLEXQ activities
• Urgent Manual Sample request button. The button allows you to book an inlet
for an urgent measurement while the analyzer performs a task.
The button is grayed out when the analyzer is ready for any measurement.
This part of the Ready screen contains the following elements:
• "Slot #": condition of each sampler tray slot (1, 2 and 3) is indicated with the
arrows that reflect the indicator diodes in the sampler tray:
• "Sampler ID": appears when the sampler is placed in the sampler tray slot and is
registered. The name of this column can be changed in the Sample Logistics
Setup (see Analysis Setup in chapter 3 of this manual).
• "Time to Result": shows time left till a result will be ready; the clock indicates
that the sample age has exceeded settings selected in Sample Logistics setup.
• "Status": gives information about a sampler in the slot:
Slot empty
Ready for processing
Processing
Completed
Continued
Green Place the sampler into the slot
or remove it from the slot.
Blinking Wait for the sampler to be
green identified.
Yellow
Blinking
yellow
A slot is ready to accept a sampler.
Sampler has been registered in the slot.
Patient and sampler data are being processed.
Measurement is completed and the result can be
viewed.
2. What Is what
Do not remove the
sampler from the slot.
Remove the sampler
from the slot.
Continued on next page
2-17