Table of Contents
Advertisement
ABL800 FLEX Operator's Manual
Quality Control Log,
Filter/trend
Step
function
(continued)
Viewing quality
Only those measurement values that fall within the statistical range are included in
control statistics
the statistical data. Therefore parameters outside the measuring range or with a "?"
are not included.
•
•
Continued
Action
When all the criteria have been selected, press Apply to make the
5.
search.
Press Trend to select the parameters.
6.
Select the desired parameter(s) by activating the check buttons (e.g.
pH, pCO
, pO
).
2
2
Press View Trend.
7.
The trend of the selected parameter(s) is displayed.
To view the filter criteria, press the View Filter (the criteria cannot be
changed, only viewed).
To print the displayed trend, press Print.
To return to the screen in step 5, press Back.
The screen shows statistics for each control solution (identified by its slot,
type and lot number) for a single parameter.
Press Next param.. or Prev. param.. to view other parameters.
Press WDC Report to create a WDC Report – see Creating a WDC Report
in chapter 8.
9. Data management
Parameter
Continued on next page
9-13
Advertisement
Table of Contents
Troubleshooting
