RADIOMETER ABL800 FLEX Operator's Manual page 131

ABL800 FLEX Operator's Manual
Analyzer settings,
Time/Date setup This program allows you to change the current time and date setting.
To reset the time and date, do the following:
Step
Acoustic signal This program allows you to set up a short beep to sound after certain events.
setup
To activate the acoustic signal, do the following:
Step
Continued
Action
1. Highlight the "Time" box by touching it on the screen.
Key in the time on the screen keypad. Confirm with Enter.
2.
A separator is automatically added between hours, minutes and
seconds.
3. Repeat steps 1-2 to reset the Date.
4. To revert to the previous settings, press Current.
Action
1. Activate the desired check button(s).
2. Select volume for the acoustic signal or activate the "Mute all acoustic
signals" check button.
3. Installation and setup
Continued on next page
3-65