RADIOMETER ABL800 FLEX Operator's Manual page 261

ABL800 FLEX Operator's Manual
Quality Control Log,
Quality control To view the Quality Control Plot screen press Plot on the Quality Control Log
plot screen.
The following diagram shows the details of a typical plot.
Out-of-range symbol
Shaded block
Control range
limits
Dots
Out-of-range
symbols
Continued
Slot number
Measurement
Lot change
Plot element
Date, time and measured value for the highlighted
measurement. Use the arrow buttons to scroll the plot and
view other measurements.
Show the upper and the lower limits of the control range
for the highlighted measurement.
Show the number of measurements for the selected
parameter. To view a measurement result, highlight a dot
on the screen and press Result.
Parameter
Solution type
Function
Measurement outside the control range and
inside the statistical range.
Measurement outside both the control and
statistical ranges.
9. Data management
Control range upper limit
Date
Time
Measured value
Control range lower limit
Continued on next page
9-15