Table of Contents
Advertisement
5. Quality control
Quality control result,
Quality control
plot (continued)
Shaded block
Control range
limits
Dots
Out-of-range
symbols
Use the following buttons to do the following:
Next Param.
Prev. Param.
Next Slot
Result
Print
Back
(For the ABL8x7 FLEX analyzers only):
The plot for the High Crea Check of the ABL8x7 FLEX analyzers presents Crea
The screen is similar to the quality control solution plot, but the Next Param. and
Prev Param. buttons are absent.
5-14
Continued
Plot element
Date, time and measured value for the highlighted
measurement. Use the arrow buttons to scroll the plot and
view other measurements.
Show the upper and the lower limits of the control range
for the highlighted measurement.
Show the number of measurements for the selected
parameter. To view a measurement result, highlight a dot
on the screen and press Result.
Display the quality control plots for the requested
parameter.
Display plots of the next control solution slot.
View quality control result for the highlighted measurement of
the highlighted plot.
Print out the plot.
Return to the previous screen.
ABL800 FLEX Operator's Manual
Function
Measurement outside the control range and
inside the statistical range.
Measurement outside both the control and
statistical ranges.
.
diff
Advertisement
Table of Contents
Troubleshooting
