Table of Contents
Advertisement
ABL800 FLEX Operator's Manual
Analyzer security,
Operators and
To add an operator to the list, do the following:
Passwords
Step
(continued)
Continued
Action
1.
Press the Add Operator button to display the Add New Operator
screen.
Type the name of the operator or operator category in the "Operator
2.
ID" box, using the screen keyboard.
3.
Enter or scan the password: in the "Password" box.
The password must be at least four characters long, and not more than
32.
4.
Re-enter or re-scan the password in the "Confirm" box.
5.
Enter or scan the logon barcode in the "Logon – barcode:" box
The logon barcode must be at least four characters long. The logon
barcode and the password can be identical.
6.
Re-enter or re-scan the logon barcode in the "Confirm" box.
7.
Press Back.
If the password is not accepted, the Add New Operator screen
remains open and a message, telling you what was wrong, appears.
If the password is accepted, the Operators and Passwords screen is
displayed.
In the Operators and Passwords screen, select the desired access
8.
profile of the new operator.
3. Installation and setup
Continued on next page
3-9
Advertisement
Table of Contents
Troubleshooting
