RADIOMETER ABL800 FLEX Operator's Manual page 173

ABL800 FLEX Operator's Manual
Patient identification,
Selecting a
To select a report layout, do the following:
report layout
Step
Electrode It is possible to see updatings of the pH, pCO
updatings cLac and cCrea electrodes (the number of electrodes depends on the type of your
analyzer) during a measurement.
To display the Electrode Updatings screen, press the Electrode Upd. button on the
Patient Identification screen.
Press Back to return to the on the Patient Identification screen.
Continued
Action
1. Highlight "Report Layout" with the up/down arrows on the Patient
Identification screen.
2. If "Report Layout" is included in the Patient ID, select a layout from
the list displayed on the right side of the screen, using the up/down
arrows. (The list of report layouts has been made in the Patient Report
Setup - see chapter 3: Installation and setup in this manual.)
If "Report Layout" is not included in the Patient ID, the text box is
separated from the rest of the items on the Patient Identification
screen.
You can select another report layout by highlighting the line on the
screen and selecting the desired layout. The patient report will be
saved in this layout.
NOTICE: If you are using mandatory input fields you are not allowed
to change the report layout during measurement unless the mandatory
fields have been filled.
4. Sample measurements
+ + 2+
, pO , cK , cNa , cCa
2 2
Continued on next page
–
, cCl , cGlu,
4-19