Table of Contents
Advertisement
ABL800 FLEX Operator's Manual
Communications,
RADIANCE
Step
Communication
Setup
(continued)
This program allows you to select the communication protocol for a connected
LIS/HIS
device.
Connection
Setup
To select the communication protocol, do the following:
Step
Continued
Action
4.
Press the check button in the "Radiance Communication" box to
activate connection.
The Icon in the "Connection status" box indicates the state of the
RADIANCE connection. "Connected" indicates an established
connection to the RADIANCE system.
The
The "Output queue" box shows the number of data queued up for
5.
transfer. It will be sent to the RADIANCE system.
Otherwise clear the queue by activating the recycle bin icon.
6.
Press Close to exit the screen.
Action
1.
Press Add on the screen.
The "Output queue" box shows the number of data queued up for
transfer. It will be sent to LIS/HIS.
Otherwise clear the queue by activating the recycle bin icon.
icon will indicate the established connection as
3. Installation and setup
well.
Continued on next page
3-69
Advertisement
Table of Contents
Troubleshooting
