Table of Contents
Advertisement
3. Installation and setup
Replacement setup,
Solution
This program allows you to select a solution level value in % below which a
warning
warning will be given.
To select the solution level value for the warning to be activated (default value is
25 %), do the following:
Step
Reagents –
This program allows you to set the time for the analyzer to give a warning before
the calibration and cleaning solutions with additives will expire.
Expiration
Warning
To set the time for the warning, do the following:
Step
3-52
Continued
Action
1.
Highlight the desired solution bottle: touch the bottle on the screen or
use Next Bottle or Prev. Bottle.
2.
Select the solution warning level (in %), using Increase or Decrease.
3.
Select warning values for solution levels in other bottles in the same
manner.
4.
Press Close to confirm the settings.
Action
1.
Select time, using the up/down arrow buttons in the "Give warning
before reagents expire" box.
The actual bottles of the analyzer depend on the analyzer type.
2.
Press Close to exit the program and confirm the settings.
ABL800 FLEX Operator's Manual
Continued on next page
Advertisement
Table of Contents
Troubleshooting
