RADIOMETER ABL800 FLEX Operator's Manual page 139

ABL800 FLEX Operator's Manual
Communications,
QA Portal
Step
(continued)
Continued
Action
2. Touch and highlight the "Port" box. Type in port number, using the
keyboard.
3. Press the check button in the "Enable communication with QA Portal"
box to activate connection.
The Icon in the "Connection status" box indicates the state of the QA
portal connection. "Enabled" indicates an established connection to
the QA portal.
The icon in the information bar will indicate the established
connection as well.
Press Close to exit the screen.
4.
3. Installation and setup
3-73