RADIOMETER ABL800 FLEX Operator's Manual page 112

3. Installation and setup
Quality control setup,
Rilibäk Ranges To activate or deactivate the Rilibäk Rules, do the following.
(continued)
Step
To add a new Rilibäk rule, do the following:
Step
3-46
Continued
Action
1. Press the On/Off button to activate/deactiviate the assigned Rilibäk
rules.
Action
1. Press the Add button to display the screen below:
2. Select the desired parameter from the parameter list shown in the right
side of the screen.
3. Press the Left arrow button until the first "Lower Limit" box is
highlighted and enter the desired lower limit.
4. Highlight the next box and select "<" or "<=".
Highlight the first "Upper Limit" box and select "<" or "<=".
5.
6. Highlight the next "Upper Limit" box and enter the desired upper
limit.
ABL800 FLEX Operator's Manual
Continued on next page