Table of Contents
Advertisement
ABL800 FLEX Operator's Manual
Patient Profiles Log,
Adding a new
To add a new patient profile, do the following:
patient profile
Step
Deleting a
To delete a patient profile from the log, do the following:
patient profile
Step
Continued
Action
Press Add New to display the screen below.
1.
2.
Use a barcode reader to scan the patient data supported by the barcode
(the "Enable General Barcode Support" should be activated in the
Miscellaneous Setup) – see the procedure in Entering information
with barcode reader in chapter 4, section Patient identification.
Or request (if connected) the data from LIS/HIS by verifying the
patient ID and pressing the Request button.
3.
To edit data on the screen, highlight an item, using the arrow buttons
and type in the data, using the screen keyboard or keypad.
Confirm each entry with Enter.
4.
When completed, press Back to return to the previous screen.
Action
1.
Highlight the desired patient profile.
2.
Press Remove.
9. Data management
Continued on next page
9-9
Advertisement
Table of Contents
Troubleshooting
