RADIOMETER ABL800 FLEX Operator's Manual page 88

3. Installation and setup
Analysis setup,
Reportable
Step
ranges
(continued)
See also Calibration verification in chapter 15 in this manual.
Sample Pre- This program allows you to select interpretation of the barcode and the patient data
registration that can be confirmed before a sample measurement.
setup
To select the settings, do the following:
Step
3-22
Continued
Action
To change all parameters to the default values, press the 1-n Set All
5.
Default button.
Press Continue to change all parameters' reportable ranges to the
default ones.
Press Cancel to keep the user-defined reportable ranges and return to
the previous screen.
6. Press Close to exit the program and confirm the selected settings.
Action
1. Use the up/down arrow buttons to select the interpretation of the
barcode setting in the "Interpret barcode input as" box.
Choose one of the following:
• Patient ID
• Accession Number
• Sampler ID.
ABL800 FLEX Operator's Manual
Continued on next page