3.4 On-site installation
3.4.1 Securing the robot stand (optional)
Robot stand parts
The robot stand consists of the following parts:
xx1000000225
A
B
C
D
Product manual - IRBP /D2009
3HAC037731-001 Revision: T
Floor mount base,
Robot pedestal,
Insulation
Cover plate
Note
The pedestal can be placed in different hole groups on the stand. Exercise care
to ensure the robot and positioner do not collide during station switching.
Recommended spacing, see the chapter for respective positioner.
© Copyright 2010-2020 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Securing the robot stand (optional)
Continues on next page
91