3.11 Adjustment of the RADF
3.11.1
Adjustment of RADF position
It is mainly performed at the installation. It is also required when the RADF is dislocated for some rea-
son such as moving the equipment.
Remove the platen sheet during adjustment.
<Procedure>
(1)
Open the RADF and remove the positioning
pin hole covers.
(2)
Attach 2 positioning pins to the equipment.
e-STUDIO520/523/600/603/720/723/850/853
ADJUSTMENT
Positioning pin
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 56
Fig. 3-52
Fig. 3-53