SSANGYONG Y200 Manual page 2170

DI07-34
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Tighten the center nut for HP pump.
Tightening torque
Notice
Replace the center nut with new one.
8. Press the upper and lower guide pins into the guide.
Notice
Check the timing chain and guide pin for contact.
Y220_07069
9. Align the marks on the HP pump sprocket and the timing
chain and tighten the bolts.
Tightening torque
10. Remove the special tool.
Y220_07070
11. Install the mounting bracket behind HP pump.
Tightening torque
Y220_07071
12. Install the chain tensioner.
Tightening torque
Notice
• Replace the chain tensioner washer with new one.
• Be careful not to drop the washer into the hole.
Y220_07072
65 ± 5.0 Nm
20 Nm + 90°
25 ± 2.5 Nm
80 ± 8 Nm
FUEL SYSTEM
DI ENG SM - 2004.4