Tire Inflation Procedure - SSANGYONG Rexton Y290 2012 Manual

8. TIRE INFLATION PROCEDURE

1) Overview
A tire equipped with wheel module should be inflated in a unique method other than conventional
one. As the tire pressure on tire pressure gauge and could be different from the value displayed
on meter cluster, the tire pressure should be checked and adjusted after specific period
(transmitting time for wheel module). In addition, the displayed value could be changed after
driving even if it was set to the specified value.
2) Tire Inflation Procedure
A. Park the vehicle on a level ground and let everyone get off the vehicle.
- If there is another vehicle equipped with the TPMS, keep the distance from this vehicle at
least 5 m to prevent interference of wheel module transmitting.
- Unload the cargo if not necessary.
- Even though you adjusted the tire pressure, the changed value cannot be displayed on
the meter cluster immediately because the wheel module sends the data with a specific
interval. And, if there are interfering conditions for radio frequency such as other vehicles
equipped with TPMS around the vehicle and severe weather changes, the indication
needs few minutes to be displayed.
Carefully explain the TPMS system and its usage to customers. The tire pressure can be
changed frequently due to driving conditions, passengers, internal temperature changes and
loads.
4190-00