Existing Systems (Software Upgrade Only, No New Installation) - Polycom RSS2000 Getting Started Manual

2. Existing Systems (Software upgrade only, no new installation)

Preparation before Upgrade
1: Obtain the 3.0.1 upgrade package and activation keys from the Polycom website or your local
service center. Save the software and keycodes on your PC.(For more details , please see the
RSS2000 Version 3 User Guide.)
Ugrade package definition
Package Name
Part1:
RSS2000.3.0.1.0_part1_full
English&Japanes&Chinese . pkg
Part2:
RSS2000.3.0.1.0_part2_additional language.
Pkg
Keycode definition
Package Name
K-keycode
U-keycode
NOTE:
For an RSS2000 running version 1.0, K-keycode and U-keycode are both needed.
For an RSS2000 running version 2.0, only the U-keycode is needed. (The U-keycode
permits the upgrade to the new software version, but does not control options activation. For
additional options, an appropriate K-Keycode must be purchased).
For an RSS2000 running version 3.0, there is no need to perform any activations whatsoever
in order to upgrade to version 3.0.1.
How to generate keycodes
Please refer to the instructions and screenshots in the "New Installation" section above.
NOTE:
Before the upgrade, please check the currently installed software version. There is a
different process for each upgrade as noted above.
Keep the RSS2000 powered on and connected to the network during the upgrade.
DOC2207B RSS2000 V3 0 1 Getting Started Guide + Release Notes
With full support for voice prompts and web UI in English,
function_with Japanese, and Chinese.
Includes full support for voice prompts and web UI in all
additional languages (but not English, Japanese, or
Chinese)
Option Activation (Basic, Multicast, Clustering)
New Version activation (Will not affect the current
installed options)
Description
Description