Allowing Or Blocking New Calls; Setting The Ringing Mode - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide

Allowing or Blocking New Calls

Setting the Ringing Mode

19
The system allows blocking new calls. The active calls are unaffected by this
setting.
To allow or block new calls
From the System menu, go to Configuration and on the System
1
Configuration page under the New Call Permission section, click
Allowed or Blocked.
Click Save to write the changes to the system.
2
Figure 4-6 New Call Permission settings
The system allows setting the ringing mode and maximum ring time (ms) for
incoming analogue calls.
To set the ringing mode
On the System menu, click Configuration. The System Configuration
1
page is displayed.
Figure 4-7 Ringing Mode settings
System Configuration
Polycom, Inc.