Installing The Realpresence Collaboration Server (Rmx) 1800 - Polycom RealPresence 1800 Getting Started Manual

A E I
PPLIANCE DITION NSTALLATION
U R P C
NPACK EAL RESENCE OLLABORATION
24
S (RMX) 1800/2000/4000
ERVER
• On the RealPresence Collaboration Server (RMX) 2000/4000 the top
hole on the Rack Spacer must be left clear as it is required for fixing the
Collaboration Server to the rack post.
4. Adjust the telescopic rack rail runner to the rack opening and mount it
onto the marked position of the rear post as described in Step 2.
Figure 1-3: Detail of rear rack spacer assembly for RealPresence Collaboration
Server (RMX) 2000/4000
5. Repeat Step 2 and Step 3 for the right rack rail runner.
6. Install the flat head screw (5), flat washer (6) and nut spring (7) in the
middle of the telescopic rack rail runner for added stability.
A I
DDITIONAL NFORMATION
width.
Figure 1-4: Detail of left rail runner from front internal view
7. Repeat Step5for the right rack rail runner.
P R
OLYCOM
: The number of screws to install depends on the rack
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE