Unpacking And Installing The Rss 2000 - Polycom RSS 2000 Getting Started Manual
Hide thumbs
Also See for RSS 2000:
- User manual (95 pages) ,
- Getting started manual & release notes (36 pages) ,
- Getting started manual (26 pages)
Advertisement
Unpacking and Installing the RSS 2000
1 Place the RSS 2000 unit on a stable flat surface in the selected location.
2 To connect to the power source, insert the power cable into the
Power connector on the rear panel of the MGC+ unit and insert the
Power cable into the power source socket.
3 Connect the lan cable to LAN1 in the back of the system.
4 Turn on the power switch.
DOC2153A
RSS 2000 Getting Started guide + Corrections- V1.0.1.002.doc.1.002
Page 2
Advertisement
