Unpacking And Installing The Rss2000 - Polycom RSS2000 Getting Started Manual

Powerful and flexible recording and streaming server

Hide thumbs Also See for RSS2000:

Preparations

Obtain the following information from your network administrator:

• RSS2000 unit, Subnet Mask and Default Gateway IP addresses

• Gatekeeper IP address, Prefix, and E.164 of the RSS2000.

Unpacking and Installing the RSS2000

1 Place the RSS2000 unit on a stable flat surface in the selected location.

2 To connect to the power source, insert the power cable into the

Power connector on the rear panel of the MGC+ unit and insert the

Power cable into the power source socket.

3 Connect the lan cable to LAN1 in the back of the system.

4 Turn on the power switch.

DOC2207B RSS2000 V3 0 1 Getting Started Guide + Release Notes

Table of Contents

Do you have a question about the RSS2000 and is the answer not in the manual?