Section 2 Dnp3 Overview; Dnp3 Standard - ABB RELION 650 Series Communication Protocol Manual

1MRK 511 413-UUS B
Section 2
2.1
650 series 2.2 ANSI
Communication protocol manual
DNP3 overview
DNP3 is a communication protocol used between components in process automation
systems. Its main use is in utilities such as electric and water companies. Usage in
other industries is not common, although technically possible. Specifically, it was
developed to facilitate communications between various types of data acquisition and
control equipment. It plays a crucial role in SCADA systems, where it is used by
SCADA master stations (aka Control Centers), RTUs, and IEDs.
GUID-F3F7289C-3344-492F-8779-D63CBF6B469A V1 EN-US
Figure 2: DNP3 communication schematic representation
1 SCADA master station / control center
2 External control points
3 Communication links (radio, microwave, spread-spectrum, twisted-pair, fiber-optics, dial-up, leased
line)
4 Remote substation (station computer and IED)

DNP3 standard

The DNP3 protocol was developed by Westronic based on the early versions of the
IEC 60870-5 standard telecontrol protocol specifications. DNP is now governed by
IEEE Std 1815-2012 IEEE Standard for Electric Power Systems Communications -
Distributed Network Protocol (DNP3) www.dnp.org.
The protocol is based on the EPA, a simplified model of the ISO/OSI model. It
specifies the data link layer, the application layer and a transport pseudo-layer. To
Section 2
DNP3 overview
GUID-9CDAE3C1-07F5-493F-A1F1-196C2F48DB16 v2
AMU0600507 v15
11