NEC UNIVERGE SV9100 Features And Specifications page 1080

Program
Program Name/Description
Number
IPL Basic Setup – Maximum MCU Group
84-27-22
Number (Mode 1)
Used to reserve VoIP DSP resources for mode
1 video conferences. When a DSP resource is
reserved it is not available for SIP voice calls.
VoIP DSP resources are shared between video
and voice calls. The system will always keep 64
resources for voice calls. When changing this
program if resources are exceeded the system
will provide an error message and will not allow
the setting to be changed.
When changing this program, all DSP
resources are reset when idle. In progress calls are
not affected, but until all DSP resources go idle this
change will not take affect.
IPL Basic Setup – Maximum MCU Group
84-27-23
Number (Mode 2)
Used to reserve VoIP DSP resources for mode
2 video conferences. When a DSP resource is
reserved it is not available for SIP voice calls.
VoIP DSP resources are shared between video
and voice calls. The system will always keep 64
resources for voice calls. When changing this
program if resources are exceeded the system
will provide an error message and will not allow
the setting to be changed.
When changing this program, all DSP
resources are reset when idle. In progress calls are
not affected, but until all DSP resources go idle this
change will not take affect.
VoIPDB DTMF Setup – DTMF Relay Mode
84-34-01
Set DTMF mode for standard SIP extensions.
The recommended method is RFC2833.
Type 3 SIP Extensions, profile 1.
VoIPDB DTMF Setup – DTMF Payload
84-34-02
Number
Set DTMF Payload for standard SIP
extensions.
Type 3 SIP Extensions, profile 1.
VoIPDB DTMF Setup – DTMF Detection Type
84-34-03
Type 3 SIP Extensions, profile 1.
VoIPDB DTMF Setup – DTMF Transmit Type
84-34-04
Type 3 SIP Extensions, profile 1.
VoIPDB DTMF Setup – DTMF Rely (inband)
84-34-05
Retransmit Type
Type 3 SIP Extensions, profile 1.
Input Data
0 = No MCU video channels
reserved
1 = 4 MCU video Mode 1
channels reserved
0 = No MCU video channels
reserved
1 = 4 MCU video Mode 1
channels reserved
0 = Disable
1 = RFC2833
2 = H.245
96 ~ 127
1 ~ 5
1 ~ 5
1 ~ 5
1080
Default
0
0
0
110
1
1
1