NEC UNIVERGE SV9100 Features And Specifications page 1076

Program
Program Name/Description
Number
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
If enabled, MUC mode resource settings are
used in Programs 84-27-22 and 84-27-23.
If disabled, non-MCU mode resource settings
are used in Programs 84-27-20 and 84-27-21.
20-13-46 Class of Service Options (Supplementary
Service) – Remote Conference
Set Class of Service option for Remote
conference.
Remote Conference Group Setting –
20-34-01
Remote Conference - Name
Set name for remote conference.
Remote Conference Group Setting –
20-34-02
Remote Conference - Password
Set password for remote conference.
Remote Conference Group Setting –
20-34-06
Remote Conference - Password Mode
Set whether users are prompted to enter a
password to access the conference. Normal will
prompt users to enter a password. If set to Skip
no password is required to enter a conference.
Remote Conference Group Setting – MCU
20-34-07
Mode for Remote Conference
Set the MCU video mode for remote
conference.
Setting this value for mode 1 or 2 determines
whether 84-27-22 or 84-27-23 is used.
ToS Setup – ToS Mode
84-10-01
When Input Data is set to 1, Item No. 07 is
invalid. When Data is set to 2, Items
No. 02 ~ 06 are invalid.
ToS Setup – Priority, IP Precedence
84-10-02
1 = Router queuing priority.
ToS Setup – Low Delay
84-10-03
1 = Optimize for low delay routing.
ToS Setup – Wideband (Throughout)
84-10-04
1 = Optimize for high bandwidth routing.
Input Data
0 = Disable
1 = Enable
0 = Disable
1 = Enable
Maximum of 12 characters.
Maximum of 4 numbers.
0 = Normal
1 = Skip
0 = Disable
1 = Mode 1
2 = Mode 2
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
0 ~ 7
0 = Low
7 = High
0 ~ 1
0 = Normal Delay, Low Delay
0 ~ 1
0 = Normal Throughput
1 = High Throughput
1076
Default
1
COS 1 ~ 15 = 1
Conferences
1 ~ 4 =
Conf 1 - Conf 4
Conferences
5 ~ 20 = blank
Conferences
1 ~ 4 = 1111
Conferences
5 ~ 20 = blank
0
0
0
0
0
0