Plotting Multiple Measurements Per Page Using a Pen Plotter
1. Dehne the plot, as explained in "Defining the Plot Function" located earlier in this chapter.
Press &J &$L .&i&f) . .
3. Choose the quadrant where you want your displayed measurement to appear on the
hardcopy. The following quadrants are available:
q .d .@&J,&
.
The selected quadrant will appear in the brackets under .Z,$&..-;QEX@.
4 . press &j$.
5. Make the next measurement that you want to see on your hardcopy.
measurement.
7. Repeat the previous three steps until you have captured the results of up to four
measurements.
Figure 4-7. Plot Quadrants
Printing, Plotting, and Saving Measurement Results
4-17