Agilent Technologies 8719D User Manual page 534

Cross Reference of Key Function to Programming Command
The following table lists the front-panel keys and softkeys alphabetically. The "Command"
column identifies the command that is similar to the front-panel or softkey function. Softkeys
that do not have corresponding programming commands are not included in this se&ion.
Step Up
Step Down
Delta Marker Mode Off
Delta Reference = Marker 1
Delta Reference = Marker 2
Delta Reference = Marker 3
Delta Reference = Marker 4
Delta Reference = Marker 5
Delta Reference = Delta F'ixed
Marker
Inverted S-Parameters
Channel Position
Channel Position
Channel Position
Channel Position
Measure Channel A
Ratio of A to B
Ratio of A to R
Active Marker Magnitude
Adapter:Coax
Adapter Delay
Adapter: Waveguide
Add
Address of Controller
Address of Disk
Address of Power Meter/HPIB
Alternate A and B
Amplitude Offset
Command
UP
DOWN
DELRFIXM
CONVIDS
MEASA
AB
AR
ADPTCOAX
ADPTWAVE
SADD
ADDRCONT
ADDRDISC
ADDRPOWM
ASEG
Key Definitions 9-63