Specifications And Measurement Uncertainties; System Specifications; Specifications For Instruments With Multiple Options - Agilent Technologies 8719D User Manual

This chapter describes the analyzer operating parameters. The parameters are expressed in the
following categories:

System Specifications

n
Supplemental Characteristics
n
System specifications describe the instrument's warranted performance over the temperature
range of 23OC f3OC (except where noted). You can verify that the analyzer is operating within
these published specifications by performing the procedures in the "Performance Tests and
Measurement Uncertainties" chapter.
Supplemental characteristics describe the instrument's performance characteristics
System Specifkations
The specifications listed in Table 7-3 range from those guaranteed by Hewlett-Packard to
those characteristic of most HP 8719D/20D/22D instruments, but not guaranteed. Codes in
the far right column of Table 7-3 reference a deGnition, listed below. These detlnitions are
intended to clarify the extent to which Hewlett-Packard supports the performance of the
HP 8719D/8720D/8722D network analyzers.
S-l: This performance parameter is verifiable using performance tests documented in the
service manual.
instrument cannot be verified outside the factory. Field procedures can verify performance
with a confidence prescribed by available standards
tested specifications, and can therefore be verified by functional pass/fail testing.
C: Non-warranted performance characteristics are intended to provide information useful in
applying the instrument. Performance characteristics are representative of most instruments,
though not necessarily tested in each unit. Not field tested.

Specifications for Instruments with Multiple Options

For instruments with any or all of the following options, standard instrument specifmations
n
Option 089
q
Option 012 (except where noted)
q
For instruments with Option 089 and
n
007, Option 007 specifications apply.
Option