Additional Setup - Agilent Technologies 8719D User Manual

Additional Setup

11. Switch off the booster ampIifier.
12. Make a connection between the open port of the 20 dB coupler and the RF IN connector on
the rear panel of the analyzer.
13. Make a connection between the coupled arm of the 20 dB coupler (along with any added
attenuation) and the R CHANNEL IN connector on the front panel.
NETWORK ANALYZER
Figure 2-52. High Power l&t Setup (Step 2a)
NETWORK ANALYZER
Figure 2-53. High Power lkst Setup (Step 2b)
RF AMPLIFIER