Agilent Technologies 8719D User Manual page 245

Modify the Standard Definitions
1. Press the following keys to start modifying the standard definitions:
select a short, press @ @. (In this example the REFLECT standard is a SHORT.)
2. T o
Press the following keys:
3.
4.
5.
6.
For the purposes of this example, change the name of the standard by pressing &.#&@B%%
and modifying the name to "LINE."
When the title area shows the new label, press:
7.
Assign the Standards to the Various TBL Classes
8. To assign the calibration standards to the various TRL calibration classes, press:
9. Since you previously designated standard #l for the REFLECT standard, press:
10. since you previously designated standard #6 for the LINE/MATCH standard, press:
11. Since you previously designated standard #4 for the THRWIJNE standard, press:
12. To complete the specification of class assignments, press:
. . . . . . . , . . . , . . . . . .
Optimizing Measurement Results 531