Agilent Technologies 8719D User Manual page 530

transmission coefficient (magnitude and phase) of the test
device.
transmission coefficient (magnitude and phase) of the test
device.
(Option 010 only) leads to a series of menus that transform the
measured data from the frequency domain to the time domain.
(Option 010 only) switches between time domain transform on
and off.
leads to the transmission menu.
presents the trigger menu, which is used to select the type and
number of the sweep trigger.
turns off external trigger mode.
leads to the TRL*/LRM* 2-port calibration menu.
(Option 400 Only) leads to the TIWLRM 2-port calibration
menu.
selects the TRL/LRM Option Menu.
is used to enter the standard numbers for the TRL LINE or
MATCH class.
is used to enter the standard numbers for the TRL THRU class
is used to enter the standard numbers for the TRL REFLECT
provides access to the 'ITL I/O menu.
provides access to the 'ITL out menu that allows you to choose
output parameters of the TTL output signal.
sets the 'ITL output (TEST SEQ BNC) on the back of the
analyzer high.
sets the TI'L output (TEST SEQ BNC) on the back of the
analyzer low.
sets the analyzer to function as a tuned receiver only, disabling
the source.
allows the marker stimulus values to be controlled
independently on each channel.
sends the sum frequency of the RF' and LO to the R channel.
Key Definitions MD