Agilent Technologies 8719D User Manual page 613

Keyboards
A keyboard can be connected to the analyzer for data input such as titling hles.
The HP C1405A Option ABA keyboard with the HP part number C1405-60015 adapter is
suitable for this purpose. Or, the analyzer is designed to accept most PC-AT-compatible
keyboards with a standard DIN connector. Keyboards with a mini-DIN connector are
compatible with the HP part number C1405-60015 adapter.
Controller
An external controller is not required for measurement calibration or time domain
capability. However, some performance test procedures are semi-automated and require the
use of an external controller. (The system verification procedure does not require an external
controller.) The system can be automated with the following computers:
IBM PC compatible computer with an HP-IB/GP-IB interface card
n
HP 9000 series 200/300 workstation
n
HP 9000 series 700 workstation with HP BASIC-UX
n
For more information about compatible computers, call your nearest Hewlett-Packard Sales and
Service office.
Sample Software
A set of sample measurement programs is provided with the
to be used as an introductory example for programming the analyzer over HP-IB. It is designed
to be easily modified for use in developing programs for specific needs. The programs are
compatible with HP BASIC versions 2.0 and later, QuickBasic, and QuickC, and will nm on an
IBM PC compatible computer (as well as the HP 9000 series 200/300/700 workstations), using
any HP 8719D/20D/22D compatible printer or plotter.
The following additional software products are also available for the HP 8719D/20D/22D:
HP 85190A IC-CAP Modelling Suite
n
Touchstone
n
(MDS) HP Microwave Design System
n
n
External Monitors
The analyzer can drive both its internal display and an external monitor simultaneously.
Recommended Color Monitors:
HP D2804A, Super VGA 1024 (14 inch display)
n
HP D2806B, Ergo Ultra VGA (15 inch display)
n
HP D2817A, Ultra VGA 1280 (17 inch display)
n
HP 8719D/ZOD/ZZD N&work