Agilent Technologies 8719D User Manual page 489

is used, along with the &GJ key,
of the stimulus. When the 1Center) key is pressed, its function
becomes the active function. The value is displayed in the
active entry area, and can be changed with the knob, step keys,
or numeric keypad.
sets the center frequency of a subsweep in a list frequency
sweep.
allows you
channel.
adjacent to the corresponding channel key. When the LED is
constantly lit, channel 1 is active. When it is flashing, channel 3
is active. The front panel keys allow you to control the active
channel, and all of the channel-specific functions you select
apply to the active channel.
The (jSii1J and @iGZ) keys retain a history of the last active channel. For
example, if channel 2 has been enabled after channel 3, you can go back to
channel 3 without pressing @Gi) twice.
brings up the printer color selection menu. The channel 1 data
trace default color is magenta for color prints.
selects the channel 1 data trace and limit line for display color
modification.
selects channel 1 memory trace for display color modification.
brings up the printer color selection menu. The channel 1
memory trace default color is green for color prints
allows you
channel.
adjacent to the corresponding channel key. When the LED is
constantly lit, channel 2 is active. When it is flashmg, channel 4
is active. The front panel keys allow you to control the active
channel, and all of the channel-specific functions you select
apply to the active channel.
The (chonj and (Ghan) keys retain a history of the last active channel. For
example, if channel 2 has been enabled after channel 3, you can go back to
channel 3 without pressing [than' twice.
brings up the printer color selection menu. The channel 2 data
trace default color is blue for color prints.
selects channel 2 data trace and limit line for display color
modification.
selects channel 2 memory trace for display color modification.
brings up the printer color selection menu. The channel 2
memory trace default color is red for color prints
selects channel 3 data trace for printer color modification.
selects channel 3 data trace and limit line for display color
modification.
to select channel 1 or channel 3
The active channel is indicated by an amber LED
to select channel 2 or channel 4
The active channel is indicated by an amber LED
to
define the frequency range
as the active
as active
the