Restarting A Calibration - Agilent Technologies 8719D User Manual

Restarting a Calibration

If you interrupt a calibration to go to another menu, such as averaging, you can continue the
calibration by pressing the ~~~.~~~'~~~~~~~ softkey in the correction menu.
Cal Kit Menu
The cal kit menu provides access to a series of menus used to specify the characteristics of
calibration standards. The following softkeys are located within the cal kit menu:
different connector types. These kits have predefined standards and are valid for most
applications It is not possible to overwrite these standard definitions.
The numerical definitions for most Hewlett-Packard calibration kits can be referenced in the
calibration kit operating and service manuals, or can be viewed on the analyzer. The standard
Application end Operation Concepts