This is a relative mode, where the marker values show the position of the active marker
relative to the delta reference marker. You can switch on the delta mode by dehning one of the
five markers as the delta reference.
1. Press LMarker_) :A. ~~~~~ :& I#F=:i to make marker 1 a reference marker.
2. To move marker 1 to any point that you want to reference:
turn the front panel knob,
q
OR
enter the frequency value (relative to the reference marker) on the numeric keypad.
q
to marker 1.
4. lb change the reference marker to marker 2, press:
When a reference marker is fixed, it does not rely on a current trace to maintain its fixed
position. The analyzer allows you to activate a fIxed marker with one of the following key
sequences:
. B & .~~~~~ ~~~~~~~~~~~~(
Figure 2-12. Marker 1 as the Reference Marker