Table Of Contents - Agilent Technologies 8719D User Manual

1. EP 8719D/20D/22D Description and Options
Where to Look for More Information . . . . . . . . . . . . . . . . . . . . .
Analyzer Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analyzer Display
Rear Panel Features and Connectors
Analyzer Options Available . . . . . . . . . . . . . . . . . . . . . . . . . .
Option lD5, High Stability Frequency Reference . . . . . . . . . . . . . . .
Option 007, Mechanical Transfer Switch . . . . . . . . . . . . . . . . . . .
Option 085, High Power System . . . . . . . . . . . . . . . . . . . . . . .
Option 089, Frequency Offset Mode . . . . . . . . . . . . . . . . . . . . .
Option 012, Direct Access Receiver Configuration . . . . . . . . . . . . . .
Option 400, Four-Sampler Test Set
Option 010, Time Domain
Option lCM, Rack Mount Flange Kit Without Handles . . . . . . . . . . . .
Option lCP, Rack Mount Flange Kit With Handles . . . . . . . . . . . . . .
Service and Support Options . . . . . . . . . . . . . . . . . . . . . . . . .
2. BMcing Measurements
Where to Look for More Information . . . . . . . . . . . . . . . . . . . . .
Principles of Microwave Connector Care
Basic Measurement Sequence and Example . . . . . . . . . . . . . . . . . .
Basic Measurement Sequence . . . . . . . . . . . . . . . . . . . . . . . .
Basic Measurement Example . . . . . . . . . . . . . . . . . . . . . . . .
Step 1. Connect the device under test and any required test equipment. . .
Step 2. Choose the measurement parameters. . . . . . . . . . . . . . . .
Setting the Frequency Range . . . . . . . . . . . . . . . . . . . . . .
Setting the Source
Setting the Measurement . . . . . . . . . . . . . . . . . . . . . . . .
Step 3. Perform and apply the appropriate error-correction. . . . . . . . .
Step 4. Measure the device under test. . . . . . . . . . . . . . . . . . .
Step 5. Output the measurement results. . . . . . . . . . . . . . . . . .
Using the Display Functions . . . . . . . . . . . . . . . . . . . . . . . . .
To View Both Primary Measurement Channels . . . . . . . . . . . . . . . .
To Save a Data Trace to the Display Memory . . . . . . . . . . . . . . . .
To Divide Measurement Data by the Memory Trace
To Subtract the Memory Trace from the Measurement Data Trace . . . . . . .
Using the Four-Parameter Display . . . . . . . . . . . . . . . . . . . . . . .
Four-Parameter Display and Calibration . . . . . . . . . . . . . . . . . . .
Quick Four-Parameter Display
Characterizing a Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
Power. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
l-l
1-12
1-12
1-12
1-12
1-12
1-12
1-12
1-13
1-13
1-13
1-13
2-2
2-3
2-3
2-3
2-3
2-3
2-3
2-4
2-4
2-4
2-4
2-4
2-5
2-5
2-6
2-6
2-7
2-7
2-7
2-8
2-9
2-9
2-9
2-11
2-12
2-12
Contents-l