Dual Channel Mode - Agilent Technologies 8719D User Manual

Dual Channel Mode

. With IH$&L-~$l%Z& set to ON and '@&XT IGSF set to 1X, the two traces are overlaid on a
single graticule (see Fiie 6-24a)
With ~~~~~~~~~ set to ON and ~ZH%IJT~ ~ESP set to 2X or 4X, the measurement data is
. , . , . . . . . . . . . . . . . . . . _ . . . . . . . . . . . . . . . . . . . . . . . . . . . .
n
displayed on two half-screen graticules, one above the other, (see Figure 6-24b).
Current parameters for the two displays are annotated separately.
The stimulus functions of the two primary channels can also be controlled independently
with other softkeys in the [Display] menu to produce different displays. See "Customizing the
Display" later in this chapter, or "Using the Four-Parameter Display Mode" in Chapter 2.
(a) Overlaid Traces
6 4 2 Application and Operation Concepts
. . . . :
. . .
Figure 6-24. Dual Channel Displays
(b) Split D&play