Gating In A Time Domain Transmission Example Measurement - Agilent Technologies 8719D User Manual

8. 'Ib access the gate function menu, press:
9. To set the gate parameters, by entering the marker value, press:
10. To set the gate span, press:
11. To activate the gating function to remove any unwanted responses, press:
As shown in Figure 2-60, only response from the main path is displayed.
You may remove the displayed response from inside the gate markers, by
Note
pressing $$SJ#@ and turning the front panel knob to exchange the "flag" marker
positions.

Gating in a Time Domain Transmission Example Measurement

select between minimum, normal, wide, and maximum. Each gate has a different passband
flatness, cutoff rate, and sidelobe levels.
center gate marker
Figure 2-60.
. . _. ~ _. . . . . , . . _
M e a s u r e m e n t s