Modify Calibration Kit Menu - Agilent Technologies 8719D User Manual

4. Store the modified calibration kit.
For a step by step procedure on how to modify calibration kits, refer to "Modifying Calibration
Kit Standards" located in Chapter 5, "Optimizing Measurement Results '

Modify Calibration Kit Menu

menu. This leads in turn to additional series of menus associated with modifying calibration
kits. The following is a description of the softkeys located within this menu:
define standard menus. Before selecting a standard, a standard number must be entered.
This number (1 to 8) is an arbitrary reference number used to reference standards while
specifying a class. The standard numbers for the predefined calibration kits are as follows:
Although the numbering sequences are arbitrary, confusion can be minimized
Note
by using consistency. However, standard 5 is always a sliding load.
key to specify a class to group certain standards.
reference.
is supplied, it will appear as one of the five softkey choices in the select cal kit menu. The
approach is similar to defining a display title, except that the kit label is limited to ten
characters
defined and all classes are specified. Be sure to save the kit with the
. . . . . . . . . . . .
standards are
1 short (m)
open(m)
2
3 broadband load
4 t h r u
sliding load
5
6 lowband load
short(f)
7
Application and Operation Concepts