Using Freelance; Outputting Plot Files From A Pc To A Plotter - Agilent Technologies 8719D User Manual

1. From the FILE pull-down menu, select IMPORT.
2. Set the Ille type in the dialog box to HGL.
The network analyzer does not use the suffix *.HGL, so you may want to
change the filename iIlter to * . * or some other pattern that will allow you to
locate the files you wish to import.
3. Click OK to import the file.
can easily fix this with the following steps:
a. From the TEXT pull-down menu select FONT.
b. Select the type face and size. (Fourteen point text is a good place to start.)
c. Click OK to resize the font.
If you wish to modify the color of the displayed text, perform the following steps:
n
a. From the ARRANGE pull-down menu select UNGROUR
b. HighIight a piece of text.
d. Select the desired text color and click OK.
e. Repeat steps b through d for each piece of text.

Outputting Plot Files from a PC to a Plotter

1. Connect the plotter to an output port of the computer (for example, COMl).
2. If using the COMl port, output the file to the plotter by using the following command:
4.22 Printing, Plotting, and Saving Measurement Results