Connections For The First Portion Of Conversion Compression Measurement - Agilent Technologies 8719D User Manual

3. 'Ib set the desired CW frequency and power sweep range, press:
4. Make the connections, as shown in Figure 3-20.
To prevent connector damage, use an adapter (HP part number 1250-1462) as a
Caution
connector saver for R CHANNEL IN.
Figure 3-20. Connections for the First Portion of Conversion Compression Measurement
5. 'Ib view the absolute input power to the analyzer's R-channel, press:
6. To store a trace of the receiver power versus the source power into memory and view
data/memory, press:
This removes the loss between the output of the mixer and the input to the receiver, and
provides a linear power sweep for use in subsequent measurements
Make the connections as shown in Figure 3-21.
7
.
Caution
connector saver for R CHANNEL IN.
NETWORK ANALYZER
M a t i n g M i x e r M e a s u r e m e n t s ( O p t i o n