Rear Panel Features And Connectors - Agilent Technologies 8719D User Manual

Rear Panel Features and Connectors

Figure l-3 illustrates the features and connectors of the rear panel, described below.
Requirements for input signals to the rear panel connectors are provided in the "Specifications
and Measurement Uncertainties" chapter.
HP-IB connector. This allows you to connect the analyzer to an external controller,
1.
compatible peripherals, and other instruments for an automated system. Refer to the
"Compatible Peripherals" chapter in this document for HP-IB information, limitations, and
configurations.
2. PARALLEL interface. This connector allows the analyzer to output to a peripheral with
a parallel input. Also included, is a general purpose input/output (GPIO) bus that can
control eight output bits and read five input bits through test sequencing. Refer to the
"Compatible Peripherals" chapter for information on conllguring a peripheral. Also refer
to "Application and Operation Concepts" for information on GPIO.
3.
KEYBOARD input (DIN). This connector allows you to connect an external keyboard.
4.
This provides a more convenient means to enter a title for storage files, as well as
substitute for the analyzer's front panel keyboard. The keyboard must be connected to
the analyzer before the power is switched on.
Power cord receptacle, with fuse. For information on replacing the fuse, refer to the
5.
HP 8719D~OD/ZZD Network Anu&ze.r Ihstallation and Quick Sturt
HP 8719D/2OD/ZZD Network Ana1gw.r Semrice Guide.
Line voltage selector switch. For more information refer to the
6.
Network Analgwr Installation and Quick Start Guide.
7.
8. 10 MHZ PRECISION REFEBENCE OUTPUT. (Option lD5)
HP 8719012001220 Oessriptionand Options
Figure 1-3. HP 8719D/20D/22D Rear Panel
the
analyzer to output to a peripheral with an
HP 8719DL?OD/ZZD