Saving An Instrument State - Agilent Technologies 8719D User Manual

Saving an Instrument State

q ;i&&, .jgg#jJgy
:
a. Connect an external disk drive to the analyzer's HP-IB connector, and conligure as
follows:
b. Press LLocal] I!@% ~~~;~~~ and enter the drive where your disk is located,
followed by @.
where you want to store the instrument state file.
e. Enter the HP-IB address of the peripheral, if the default address is incorrect
(default = 00). Follow the entry by pressing ml.
f. Press (Local) and select one of the following:
n Choose ~~~~~~~~~ to allow the andyzer to control pefipher.-&
n
peripheral access operations
Choose ~~~~~~~~~~~~~~~ to allow yourself to control the analyzer over HP-IB and
n
also allows the analyzer to take or pass control.
Press [j) ~~~j~~~~~..
The analyzer saves the state in the next available register, if you are saving to internal
memory, or saves the state to disk. Although one file is shown to represent an instrument
state on the analyzer display, each instrument state is composed of numerous iiles (which
can be viewed on a PC).
If you have saved enough files that you have used all the default names
do one of
use another disk
n
rename an existing ille to make a default name available
n
re-save a illelregister
n
delete an existing file/register
n
following in order to save more states:
the
Printing, Plotting, and Saving Measurement Results