Agilent Technologies 8719D User Manual page 629

Convention
One Word
Two Words
Two Words in a Group
Three Words
Some codes require appendages (ON, OFT, 1, 2, etc). Codes that do not have a front-panel
equivalent are HP-IB only commands. They use a similar convention based on the common
of the function.
Valid Characters
The analyzer accepts the following ASCII characters:
letters
n
decimal points
n
+/-
n
semicolons (;)
quotation marks (")
n
returns (CR)
carriage
n
linefeeds (LF')
n
Both upper- and lower-case letters are acceptable. Carriage returns, leading zeros, spaces, and
unnecessary terminators are ignored, except for those within a command or appendage. If the
analyzer does not recognize a character as appropriate, it generates a syntax error message and
recovers at the next terminator.
1 l-24 Compatible Peripherals
Power
start
Electrical Delay
of Second Word
Search Right
Marker -4enter Four Letters of Both
Gate -&pan
First Three Lett.e~~ of First Word, First Letter CALKN50
of Second Word, First Four Letters of Third
Word
Pen Num Data
For BP-IB Code Use
Example
POWE