Creating Flat Limit Lines - Agilent Technologies 8719D User Manual

4. Reconnect your test device.
5. lb better view the measurement trace, press:

Creating Flat Limit Lines

In this example procedure, the following flat Iimit Iine values are set:
Frequency Range . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Range
10.11 GHz to 10.37 GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . -1.4 dB to -7.4 dB
9 GHz to 9.75 GHz . . . . . . . . . . . . , . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 120 dB to -45 dB
10.8 GHz to 11.48 GHz.. .~.............,........,.............,.............. -120 dB to -45 dB
The minimum value for measured data is -200 dB.
Note
1.
To create a new Iimit line, press:
2.
The analyzer generates a new segment that appears on
determining the value of the
3.
This would correspond to a test specification of -4.4 f3 dI3.
4. To define the Iimit as a flat line, press:
segment, marker 1 also appears on the display.
new
center of the display. 'Ib aid in
the