Agilent Technologies 8719D User Manual page 655

deviation from linear phase measurement,
2-40
device clear (DCl), 11-20
device types for HP-IB, 11-17
dimensions of 7 mm test port, 7-23
dimensions of analyzer, 7-26
DIN keyboard, 7-25
direct access receiver configuration option,
1-12
directional coupler compensation, 5-37
directivity, 6-57
directory size, 12-4
discrete and continuous markers, 2-16
disk
external, 12-4
internal, 12-4
storing data, 12-4
disk drive, configuring to plot, 4-11
disk file contents, 4-33
disk fIIes
using with other models, 12-6
disk formatting, 4-43
disk storage of a sequence, 2-71
disk storage problems, 4-43
display
four-parameter, 2-9
setting intensity, 6-47
display, blanking, 6-48
displayed measurement title, 4-29
display format, 6-31
group delay, 6-32
imaginary, 6-36
log magnitude, 6-31
phase, 6-32
polar, 6-34
smith chart, 6-33
SWR, 6-35
display functions, 2-5, 6-41
color, 6-47
display functions, four-parameter, 2-9
display information, l-6
display location, l-4
display markers; 2-16
display markers activation, 2-17
display memory, 6-7
display memory trace, 2-6
display of analyzer, l-6
display status notations, l-7
display titling, 2-8
display trace math, 2-7
divide measurement data by the memory
trace, 2-7
documents
reference, 6-164
does not respond to parallel poII (PPO), 11-20
DOS format, 11-7
drift
frequency, 5-3
temperature, 5-2
1 1 - 2 0
problems with, 6-43
duration of measurements, 7-8
dynamic range, 7-l
increasing, 5-58
limitations, 7-l
editing a sequence, 2-68
editing frequency segments, 5-36
editing limits, 6-113
editing Iimit segments, 2-49
editing segments, 6-l 13
editing test sequences, 6-141
edit list menu, 6-26
edit subsweep menu, 6-26
electrical delay, 6-40
electrical delay block, 6-6
electrical delay of calibration standards, 5-6
electrical length and phase distortion
measurement, 2-37
measurement results, 5-51
measurements of, 5-51
electrically long devices, the causes of
measurement problems, 5-51
electrical offset, 6-73
electrostatic precautions, 7-26
enabling channels, 6-8
end or identify (EOI) control line, 11-18
entering calibration constants, 5-28
entry block location, l-4
entry keys, 6-10-11
environmental characteristics, 7-26
EOI (end or identify) control line, 11-18
error-correction, 5-2, 5-8
calibration standards, 5-6
characteristics affected, 5-4
concepts, 6-56-107